- Compatible systems-on-module
- Storage – 1x MicroSD card for Raspberry Pi CM4 Lite, 1x M.2 socket for NVMe SSD (See PCIe expansion section)
- Video Output – 2x HDMI output ports, 1x MIPI DSI connector
- Camera Input – 1x MIPI CSI connector
- Networking – Gigabit Ethernet RJ45 port capable of PoE 802.3bt (100 W) power input handling
- USB
- 2x USB 2.0 ports
- 1x micro USB port to program regular Raspberry Pi CM4 modules with eMMC flash
- PCIe expansion
- 1x 16-lane size vertical PCIe connector with x1 lane implementation in the standard Mini-ITX location
- 1x 1-lane PCIe side port connector to allow to plug a standard x1 PCIe add-on card on a left side
- 4x mini PCIe slots with PCIe, USB 2.0, and I2C interfaces
- 4x M.2 Key E slots with x2 (dual) PCIe lanes, USB 2.0 interfaces
- 1x M.2 Key M slot to allow M.2 2280 NVME SSD implementing x1 PCIe lane
- I/O expansion
- 40-pin GPIO header compatible with Raspberry Pi HAT expansion boards
- Additional I2C header
- Misc
- PWM fan connector
- RJ45 port implementing CISCO style RS232 serial console cable
- 2×7 row header for jumper-selected settings/controls
- RTC + external battery header
- Power Supply
- 12V DC input via power barrel jack and 2-pin header; mutually inclusive to support power failover
- SATA power header with 12V, 5V, GND
- 4-pin PoE header compatible with Raspberry Pi PoE HAT
- Dimensions – 170 x 170 mm (Mini-ITX form factor)
을 내놨습니다...
왠지 돈지랄 같지만, 넵...
https://www.tindie.com/products/alftel/seaberry-pi-cm4-carrier-board/
캐나다 회사서 만든거네요. 캐나다 우정으로 보내는 거구요.
435달러라... 사는 사람 있을까요?